Step 1. Add Station to Market
Before starting the station, make sure to add it to your market.
How to add a station to your market - Video
Watch this Video, or follow the step-by-step guide below.
How to add a station to your market
How to add a station to your market
Open the Brick App > Menu > click Add Station
Add Station ID and choose the number of slots
You can add the ID by writing the number on the QR or scanning the QR code
When you've filled in all the information, the Add Station button will become red and clickable
The station will be automatically added to your market
Check Station in the admin dashboard, and you should find it!
Step 2. Station Setup & Installation
Small & Medium Stations
Both 6-slot and 12-slot stations come with:
1x Power cord
1x AC/DC Converted
These two can be assembled into a Power Adapter.
Power adapter - Installation
Power adapter - Installation
1. Connect the power cord and ad/dc converted
2. Plug in the power cord to a power outlet
3. Adapter lights up? All good!
Small Station (6-slot) – Setup, Installation & Testing
Small Station (6-slot) – Setup, Installation & Testing
1. Plug in the station
2. Turn the ON/OFF ( I / 0) button to ON (I)
3. The lights will start to flash rapidly.
Blinking lights = starting up. Wait ~30s
4. From left to right = Searching for network. Wait ~5-30s.
5. Solid lights at all slots power banks = ready
6. Test the station
Wait a minute until the station has solid lights to make sure it has found a good connection.
Scan the station to see if it works
If there's no problem, everything is ready to go and can be delivered to a venue!
Medium Station (12-slot) – Setup, Installation & Testing
Medium Station (12-slot) – Setup, Installation & Testing
1. Plug in the station
2. Turn the ON/OFF ( I / 0) button to ON (I)
3. The lights will start to flash rapidly.
4. From left to right = Searching for network Wait ~5-30s.
5. Solid lights at all slots power banks = Ready
6. Test the station
Tower & Large Station
Tower Station (24-slot) – Setup, Installation & Testing
Tower Station (24-slot) – Setup, Installation & Testing
1. Plug in the station
2. Turn the ON/OFF ( I / 0) button to ON (I)
3. The lights will start to flash rapidly.
4. From left to right = Searching for network Wait ~5-30s.
5. Solid lights at all slots power banks = Ready
6. Test the station
Large Station (48-slot) – Setup, Installation & Testing
Large Station (48-slot) – Setup, Installation & Testing
1. Plug in the station
2. Turn the ON/OFF ( I / 0) button to ON (I)
3. The lights will start to flash rapidly.
4. From left to right = Searching for network Wait ~5-30s.
5. Solid lights at all slots power banks = Ready
6. Test the station
Experiencing issues?
You can find a downloadable PDF with full setup and troubleshooting here!